3D Systems, Inc.
5
INTRODUCTION
Thank you for purchasing “ProJet® 3-D Printing System. We pride ourselves in our ability to offer customers three dimensional printing
solutions. The 3D System team is condent your system will provide many years of service.
ABOUT THIS GUIDE
• Safety: Read prior to handling VisiJet® Materials or operating the printer. The safety sections describe how to safely handle the
print material to avoid damage and injury when operating the printer. For more detailed material safety information, refer to the
VisiJet® Material Handling Guide.
• System Requirements: Provides electrical requirements necessary to run your printer. For more detailed facility requirements
information, see the ProJet® 3-D Printers Facility Requirements Guide.
• Familiarization: Provides a brief description of the printer system.
• Printer Setup: Provides information on preparing the printer for printing using the software, and how to send test and demo builds
to the printer from your computer. Also refer to your online help for software instructions.
• Operations: Describes loading and running the printer; start and stop build jobs; monitor and control build jobs; unload build parts;
and disposing waste material.
• Error Messages: Denes the error messages you may see on the printer’s operator’s panel and provide the actions to take.
• Finishing: Provides information on nishing parts.
• Maintenance: List printer maintenance procedures which must be done to ensure high part yield and low printer down time.
Semi-annual preventive maintenance requires a certied 3D Systems Technical Support Representative.
• Troubleshooting: If problems occur with the printer, look for solutions in this section rst. It describes some common problems
which can occur and suggests corrective actions.
• Technical Support: List of contact numbers of sale and support personnel for your printer system.
1
2
To Next Page
Loading...
Need help?
General
