3D Systems, Inc.
66
FINISHING
22
When the build is complete, refer to the VisiJet® Material Handling and Post-Processing Guide for information on how to detach parts
from build platform, remove support material from parts, and clean parts to a smooth nish.
Basic part coating and equipment maintenance recommendations are also included.
OTHER DOCUMENTS
23
• Parts Finisher User Guide
• Material Safety Data Sheets (MSDS- SDS)
• ProJet® Quick Reference Guide
• Facility Requirements Guide
• VisiJet® Material Handling and Post-Processing Guide
• TIPS for our Customers
• Print 3D Quick Start Guides
SERVICE AND SUPPORT
24
For information, questions, or comments about your ProJet®3-D printer system(s), VisiJet® materials, or request service,
please contact a 3D Systems Customer Service or Sales Representative nearest you.
3D Systems
333 Three D Systems Circle
Rock Hill, SC 29730 USA
tel: 803.326.4080
fax: 803.324.8810
toll free: 800.889.2964
E-mail: moreinfo@3dsystems.com
www.3dsystems.com
NYSE: DDD
• North & South America: support-us@3dsystems.com
• Asia Pacic: support-apac@3dsystems.com
• Europe/Middle East/Africa: support-emea@3dsystems.com
HOW TO ORDER PARTS
• New and refurbished parts made by 3D System’s manufacturer are used when performing warranty repairs and in building replace-
ment parts and systems. Refurbished parts and systems, are parts or systems that have been returned to 3D Systems, some of
which were never used by a customer. All parts and systems are inspected and tested for quality. Replacement parts and systems
are covered for the remaining period of the limited warranty for the product you bought. 3D Systems owns all parts removed from
repaired products.
• To order replacement parts, contact 3D Systems Customer Service Support or contact your local reseller.
• When contacting 3D Systems Customer Service Support, have your printer serial number available to give to customer support.
To Next Page
Loading...
Need help?
General
