EasyManuals Logo

3D Systems ProJet 3500 Max Series User Manual

3D Systems ProJet 3500 Max Series
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
3D Systems, Inc.
15
HEALTH HAZARDS / IRRITANT
Uncured VisiJet® part material is a sensitizer. Skin or eye irritation could occur when exposed to the chemical composition of the
material.
Any chemical may exert harmful effects if contacts or enters the body. VisiJet® part material is a sensitizer and irritant.
Skin Sensitization
Uncured VisiJet® part material is a sensitizer. Skin or eye irritation could occur when exposed to the chemical composition of the
material.
Uncured material is a sensitizer, and can cause allergic reactions if contacts skin without protective gloves. Refer to personal pro-
tection equipment for more information. To avoid sensitization, do not allow uncured material to contact skin. Consult the MSDS for
specic information about the sensitization potential.
Inhalation
Under normal operation, inhalation is not an expected route of entry.
Ingestion
Uncured VisiJet® part material is toxic if ingested.
Uncured material is toxic if ingested. Uncured material must not be present where food and drink are stored, prepared, or con-
sumed and not ingested. After handling materials, wash hands with soap and water before consuming or preparing food.
Handling Finished Parts
Finished (cured) parts can be handled or disposed of the same as standard household plastic products. VisiJet® parts are not
recyclable. VisiJet® materials are not intended for and cannot be used for medical implant, or food or drink handling applications.
Exposure control
The printer has a variety of built-in engineering controls which are designed to prevent operator exposure. Do not try to change or
disable these controls.
Hygienic Practices
Appropriate hygienic practices should be followed, including washing with soap and water before meals, breaks, smoking, applying
cosmetics, using toilet facilities, and after work.
Employees should be alerted to the need to clean and rinse off any contacted surface promptly in order to prevent further contami-
nation. Ensure a convenient washroom location is provided with access to soap, water, and disposable paper towels.
Irritant

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 3D Systems ProJet 3500 Max Series and is the answer not in the manual?

3D Systems ProJet 3500 Max Series Specifications

General IconGeneral
Brand3D Systems
ModelProJet 3500 Max Series
Category3D Printers
LanguageEnglish

Related product manuals