3D Systems ProX DMP 300 User Manual

933D SYSTEMS, INC. PN:80-D27 Rev.B
Cabinet lter replacement
The doors of the control cabinet and the supply cabinet are equipped with lters that must be replaced every 6 months.
Parts required :
• Control cabinet : part number 1002354V00 - quantity = 1.
• Supply cabinet : part number 5008065D00 - quantity = 2.
Procedure:
On the control cabinet:
1. Open the access door of the cabinet.
2. Remove the lter grid from the door.
3. Replace the lter with the new one.
4. Ret the lter grid on the door.
5. Close the access door of the cabinet.
On the supply cabinet:
1. Open the access door of the cabinet.
2. Remove the 2 x lter grids from the door.
3. Replace the lters with the new one.
4. Ret the 2 x lter grids on the door.
5. Close the access door of the cabinet.

3D Systems ProX DMP 300 Specifications

General

Brand	3D Systems
Model	ProX DMP 300
Category	3D Printers
Language	English