Pannoramic 250 1.15 User’s Guide 1 Product Description
Motorized camera changer
Figure 4 – Motorized camera changer
You can fit two cameras into the Pannoramic 250 on the first adapter (1) (fluorescent position) and
the second adapter (2) (brightfield position) at the same time. They are set and switched by the
software automatically, without any human assistance.
This system also enables switching between brightfield and fluorescent scanning by one click.
Warning!
The installation of the cameras in Pannoramic 250 must be carried out
by trained professionals!
In any other case the warranty will be automatically voided.
Supplier/Distributor is not liable for any damages caused by an
installation not carried out by professional person.
March 13, 2012 – Rev. 1 3DHISTECH Ltd. 18(135)
To Next Page
Loading...
