105
Edit the Tech ID and Job Number using the
same procedure described previously. Up to 14
alphanumeric characters can be entered in each
field. Use the [Tab] key to jump between highlighted
boxes. Use the [Setup] key to clear both fields. The
data entered into each field will remain present for
every saved result until explicitly changed or cleared.
In this way information that is infrequently changed
(Tech ID for instance) does not need to be re-keyed
every time. These two fields are appended to the
TDR trace results when they are printed or stored in
PCLink.
At least 200 TDR or mixed TDR/Autotest records
can be saved. The percentage of remaining memory
for results storage is shown in the box at the top of
the screen.
To Next Page
Loading...
Need help?
General
