Aastra 6757 - To program a number

Programmable keys
54
To program a number:
You can program the number to call an internal or external party.
After selecting the key to be programmed (the associated indicator
flashes):
1 - Press the interactive Number key.
-> The display prompts you to enter the number.
2 - Dial the party's number without forgetting the network access
code if it is an external party (0).
• In case of an error, press the interactive Erase key.
3 - Press the interactive Enter key to validate the programming.
-> The display shows the programming of the key.
Therefore, your party will be called by simply pressing this key.
To program a series of codes:
This is to program a series of codes that will be interpreted by the
phone that already has a call in progress. For example, you can
program the sequence to access your voicemail.
After selecting the key to be programmed (the associated indicator
flashes):
1 - Press the interactive Tone key.
-> The display prompts you to enter the code.
2 - Dial the sequence.
Example: Dial the number of voice mailbox followed by #, then
the personal access code followed by #.
• In case of an error, press the interactive Erase key.
• To insert a pause between two series of codes, press the
interactive Pause1 or Pause2* key.
3 - Press the interactive Enter key to validate the programming.
-> The display shows the programming of the key.
Therefore, by simply pressing this key, you give the phone with a
call in progress all the information required and quickly accept the
required service.
* Depending on the programming performed by the system operator.
Number
Erase
Enter
Tone
N°B.V.#code#
Enter