Aastra 6757 - To program supervision

Programmable keys
55
To program supervision:
You can program the supervision function of another phone or of
your own phone.
After selecting the key to be programmed (the associated indicator
flashes):
1 - Press the interactive Superv. key.
-> The display prompts you to choose a type of supervision
(voice mailbox, phone or external line).
2 - Press, for example, the interactive Extens. key.
-> The display suggests to supervise your own phone or another
phone.
3 - Press, for example, the interactive Other key to supervise
another phone.
-> The display prompts you to enter the number of the phone that
you want to supervise.
4 - Dial the number of the phone, then press the interactive Enter
key.
-> The display prompts you to select the signal which the
supervised phone will output to you.
5 - Press, for example, the interactive Beep key.
-> The display shows the programming of the key.
To make the best possible use of this function, reserve for it the
keys of the first page (#1), or of the extension module if you have
one.
Therefore, you have a continuous view of the supervised phone's
telephone activity and can intervene by simply pressing this key.
To program a feature:
You want to program a feature: message, forward, agenda, lock,
absent, filter, mute, protect, …
1 - Press the interactive Feature key.
-> The display prompts you to choose a feature.
2 - Press the interactive key that corresponds to the desired
feature (Forward for example).
-> The display prompts you to select the type of forwarding.
3 - Press, for example, the interactive Immed. key.
-> The display prompts you to enter the number of the extension to
which the calls will be forwarded immediately.
Superv.
Extens.
Other
Enter
Beep
Feature
Forward
Immed.