Installation
29
Installation
Scope of Delivery
The delivery consists of:
• One OpenCom 131 communications system (in a basic version) or OpenCom 130
(in a basic version with a basic module) or OpenCom 150
• One connection cable for the ISDN S
0
port
• One set of mounting screws and wall plugs
• One plug-in power supply (of the TR25240-E-01A13 type) to supply the basic
module
With the OpenCom 130 this power supply is dimensioned to operate the basic
module only. Installing the expansion module requires an additional power
supply.
• One set of short user guides
• One CD including the complete documentation and software
The OpenCom 130 expansion set consists of:
• One expansion module
• One AC adapter with a connection cable to supply the expansion module with
power
• One mounting set with which to install the expansion module and the AC adapter
in the OpenCom 130 housing
• One (short) Ethernet connection cable with which to connect the basic module to
the expansion module.
To Next Page
Loading...
Need help?
General
