Configuration
84
Then the EULA (End User License Agreement) is displayed. Confirm the license
agreement by clicking on Accept.
Note
If you do not confirm the EULA, the dialogue for loading the firmware page is
opened. This is where you can download an older licensed firmware version once
again.
7. Click on the Configurator button on the home page.
To support your next configuration steps, you should activate the Assistant mode on
the entry page of the Configurator. Please also pay attention to the online help.
Note
Deactivate any connection via a proxy server which has been configured. Open the
Internet Explorer, go to the menu Extras and open the Internet options dialogue
box. Select the Connections register and deactivate the Proxy Server.
You will find notes on using the Configurator and in the online help. Click on Help in
the menu bar or click on TOC to activate an overview of help topics.
Tip: Often a small yellow exclamation mark symbol appears below
the navigation area upon the first-time commissioning. Click on
this symbol to obtain information on necessary configuration
steps or on the communications system status.
Loading the Online Help
The online help can be loaded in the Configurator:
1. Go to the System: Components menu. Select the entry Online Help and click on
Browse.
2. Look for one of the language-specific ZIP files in the “OLH” directory of the
product CD. Confirm your choice by clicking on Open.
3. Then click on Load to transfer the online help to the system.
Please note: After completion of the loading operation, the system will take a
few minutes to analyse the transferred file.
To Next Page
Loading...
Need help?
General
