abaco systems CEI-520

Need help?

Do you have a question about the abaco systems CEI-520 and is the answer not in the manual?

Summary

Installation Guide

Board Installation Procedures

ISA Bus Address Configuration

Details on configuring the base memory and I/O addresses via DIP switches.

Configuring CEI Models

CEI Software Installation

Steps for installing the CEI-SW and CEI-x20 software distributions.

Discrete I;O Configuration

CEI-100;200 ARINC Test Program

Accessing and Navigating the Program

Instructions on launching the CONDOR program and navigating its menus.

Transmit and Receive Operations

How to define messages, transmit data, and set up reception and triggering.

Program Interface Library (API)

API Overview and OS Support

ARINC Interface Programming

Steps and functions for programming the ARINC interface and channels.

Channel Configuration and Control

API functions for channel setup, read-back, mode control, and interrupts.

VxWorks Support

VxWorks Image and API Build

CEI-100;200 ARINC Interface Description

Board Loading and Control

ARINC Channel Setup and Data Handling

Details on setting up ARINC channels, timers, modes, and data transfer.

Appendix A: CEI-200 Base Bit Rate Modification

Bit Rate Modification Procedure

Steps to calculate a clock-scaling factor for modifying ARINC channel bit rates.

Appendix B: CEI-x20 Structure Definitions

AR_CHANNEL_PARMS Structure

Appendix C: Parametric Voltage Programming

CEI-220 DAC Definitions

CEI-520;520 A DAC Definitions