abaco systems CEI-520 - Hardware Specifications; Table 1. Hardware Specifications

Introduction Hardware Specifications
CEI-100/CEI-200/CEI-x20 User’s Manual 2
that the only Windows platforms supported by the CEI-220 and CEI-
420/420A are Windows NT and 32-bit XP). The distribution includes
source code for many sample programs, supporting ANSI C, C#.NET,
Linux, VxWorks, and Visual Basic (VB6 and VB.NET). A LabWindows
CVI function panel and sample program are also provided.
BusTools/ARINC, our Windows-based ARINC data bus analysis and
simulation software, is available to control any of these products (except
the CEI-100, CEI-200, CEI-820, and CEI-820TX). Visit our web site for
additional information or to download demo software.
Hardware Specifications
This section shows hardware specifications for the CEI-100, CEI-200,
CEI-220, CEI-420, CEI-420A, CEI-520, CEI-520A, CEI-620, CEI-820,
and CEI-820TX.
Table 1. Hardware Specifications
Feature
CEI-100
CEI-200
CEI-220
CEI-420
CEI-420A
CEI-520/520A
CEI-620
CEI-820
CEI-820TX
Host Bus
Interface
8 bit ISA
16 bit ISA
16 bit ISA
16 bit PC/104
16 bit PC/104
with optional
PC/104plus
pass through
connector
(CEI-520)
5V PCI (32-bit)
(CEI-520A)
3.3V or 5V PCI
(32-bit)
5V cPCI
(32-bit)
3.3V or 5V
PMC (32-bit)
3.3V or 5V
PMC (32-bit)
Dual Port RAM
4K or
8K bytes
16K or 32K
64K bytes
64K bytes
64K bytes
512K bytes
512K bytes
1M bytes
2M bytes
Transmit
Channels
1
Up to 4
Up to 12
Up to 8
Up to 8
Up to 16
Up to 16
Up to 8
Up to 32
Receive
Channels
2
Up to 8
Up to 12
Up to 8
Up to 8
Up to 16
Up to 16
Up to 8
1
ARINC
Transmit Bit
Rates
12.5 or 100
Kbs
12.5 or 100 Kbs
or
programmable
12.5 or 100
Kbs
12.5 or 100
Kbs
12.5 or 100
Kbs
12.5 or 100 Kbs
12.5 or 100
Kbs
12.5 or 100 Kbs
or
programmable
12.5 or 100 Kbs
or
programmable
ARINC Receive
Low Speed
10.4 to 15.6
Kbs
10.4 to 15.6
Kbs or
programmable
10.4 to 15.6
Kbs
10.4 to 15.6
Kbs
10.4 to 15.6
Kbs
10.4 to 15.6 Kbs
10.4 to 15.6
Kbs
10.4 to 15.6
Kbs or
programmable
10.4 to 15.6
Kbs or
programmable
ARINC Receive
High Speed
83 to 125 Kbs
83 to 125 Kbs
or
programmable
83 to 125 Kbs
83 to 125 Kbs
83 to 125 Kbs
83 to 125 Kbs
83 to 125
Kbs
83 to 125 Kbs
or
programmable
83 to 125 Kbs
or
programmable
ARINC
Transmit Slew
Rate
Adjustment
Manual
Manual
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Memory
Footprint
Required
4K or 8K bytes
32K bytes
4K bytes
(paged access
by host to full
64K bytes)
4K bytes
(paged access
by host to full
64K bytes)
4K bytes
(paged access
by host to full
64K bytes)
16M byte
16M byte
16M byte
16M byte
I/O port
address
required
Yes
Yes
No
No
No
No
No
No
No
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com