CEI-100/200 ARINC Test Program Receive Menu
CEI-100/CEI-200/CEI-x20 User’s Manual 53
Receiving Messages
After the trigger is set up, you can start reception from the Receive Menu.
Received messages are stored in a buffer until the trigger bits are detected
in a message, or the messages are stored after the trigger bits are detected.
You can then examine the buffer and store it to a file from the Receive
Menu.
The optional program ANALYZER.EXE provides sophisticated forms of
triggering, filtering, and data capture. ANALYZER.EXE also provides
expanded capability for data translation and analysis.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...