Program Interface Library AR_RESET
CEI-100/CEI-200/CEI-x20 User’s Manual 128
AR_RESET
CEI_INT16 ar_reset (CEI_INT16 board);
This function causes the interface board to stop processing ARINC data.
Care should be taken not to reset the interface if there is still data in the
transmit buffer(s) to be sent.
Use AR_XMIT_SYNC to determine if more ARINC data remains to be
transmitted, and wait for it to be loaded into the transmitter.
ARS_NORMAL Command was successful.
ARS_WINRTFAIL Command failed, WinRT error.
ARS_INVBOARD Board number out of range.
ARS_INVARG Board not initialized.
ARS_CHAN_TIMEOUT Firmware communications failure.
ARS_BOARD_MUTEX Failed to acquire/release the board lock.
board (input) board number of interest.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...