CEI-100/CEI-200/CEI-x20 User’s Manual 54
CHAPTER 4
BusTools/ARINC Data Bus Analyzer
General Information
BusTools/ARINC is an optional ARINC 429 analysis and simulation
utility which runs under select versions of Windows. It enhances the utility
of an underlying ARINC 429 interface board by expanding your scope of
control and by providing additional instrumentation and analytical tools.
Additionally, BusTools/ARINC provides support for devices configured
with ARINC 561, 573/717, or Commercial Standard Digital Bus (CSDB)
channels.
BusTools/ARINC supports usage of up to four boards at the same time or
independently and allows simultaneous control of all channels on each
board.
Its data logging function streams data to disk or memory and replays it in a
time-sequenced display. It provides multiple buffering mechanisms,
including real-time display of data in engineering units. Strings of
outgoing messages are generated, repeated, or automatically stepped
through a sequence. Strings of incoming messages are filtered and
captured for current or future analysis. A database of standard ARINC
429 translations is included. Translation among binary, hexadecimal, and
engineering units is provided, as is a powerful user-defined label facility.
BusTools/ARINC Demo Software
A free demo version of BusTools/ARINC is available on our web site (at
http://www.abaco.com/products/bt-arinc-bustools-software-analyzer). The
demo software operates over a simulated ARINC 429 interface board, but
is otherwise identical to the full version.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...