CEI-x20 Structure Definitions Structures
CEI-100/CEI-200/CEI-x20 User’s Manual 171
200K bps. Simply specify the desired baud rate (in
bps). For example, to set the baud rate of a
particular transmit/receive channel to 98K bps, set
‘BaudRate’ to 98000.
ChannelType The function returns the type of the specified
channel:
CHAN_NOT_IMPLEMENTED Channel is not
implemented
CHAN_ARINC429 Channel is an ARINC-429
channel
CHAN_ARINC717 Channel is an ARINC-573/717
channel
CHAN_CSDB Channel is a CSDB channel
InternalWrap Defines the Internal wrap-around enable (receiver
only):
AR_WRAP_ON Enables internal wrap-around
mode
AR_WRAP_OFF Disables internal wrap-around
mode
IntCount Enables an interrupt when “IntCount” labels have
been received or transmitted. If non-zero buffer
full/empty interrupts are also enabled. If zero no
interrupts are generated.
Parity Selects the channel parity configuration:
AR_EVEN, AR_ODD or AR_RAW
AutoSync Selects Autosync or Raw mode for ARINC 573/717
receivers:
ARU_717_AUTOSYNC or ARU_717_RAW
HWEncoding Selects the hardware encoding for ARINC 573/717
channels only:
ARU_717_H_BI_PHASE selects Harvard Bi-Phase
Encoding
ARU_717_BIPOLAR selects Bipolar R-T-Z
Encoding
NULL disables the transmitter
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...