Program Interface Library AR_GET_CONFIG
CEI-100/CEI-200/CEI-x20 User’s Manual 84
ARU_RX_CH01_SDI_VALUE –
ARU_RX_CH32_SDI_VALUE receiver 1 - 32 SDI value (0-3).
ARU_TX_CH01_SHUT_OFF –
ARU_TX_CH32_SHUT_OFF transmitter 1- 32 shut off status.
ARU_RX1_4_THRESH_VALUE receiver 1-4 threshold (220).
ARU_RX5_8_THRESH_VALUE receiver 5-8 threshold (220).
ARU_RX9_10_THRESH_VALUE receiver 9-10 threshold (220).
ARU_RX11_12_THRESH_VALUE receiver 11-12 threshold (220).
ARU_INPUT_THRESH_VALUE discrete onput threshold (220).
ARU_TRANSMIT_VOLT_VALUE transmitter output level (220).
ARU_PARAMETERIC_SUPPORT parametrics supported or not.
ARU_DISCRETE_INPUTS current value of discrete inputs.
ARU_TX_CH01_HB_INJ –
ARU_TX_CH32_HB_INJ high-bit injection on/off.
ARU_TX_CH01_LB_INJ –
ARU_TX_CH32_LB_INJ low-bit injection on/off.
ARU_TX_CH01_GAP_INJ – transmit short gap
ARU_TX_CH32_GAP_INJ enabled/disabled.
CEI-520/520A/620/820 only values:
ARU_RX_CH01_AWAIT_DATA – is ‘await data’ mode currently
ARU_RX_CH32_AWAIT_DATA enabled.
ARU_RX_CH01_WAIT_PENDING – is there a pending ‘await data’
ARU_RX_CH32_WAIT_PENDING mode wait operation.
ARU_DAC_VALUE_01 -
ARU_DAC_VALUE_16 raw DAC values.
CEI-520/520A/620 only values:
ARU_OUTPUT_LEVEL_ADJ_01- enable adjustable ARINC
ARU_OUTPUT_LEVEL_ADJ_32 transmit voltage levels.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...