11-4 Connecting to an External Computer
5. Open the Win2K_XP folder.
6. Double-click the file
Abaxis Driver Setup.exe.
7. Installation then begins. When the installer
finishes, click OK.
8. Use the USB cable to connect the VS2 to any available USB port on the computer.
9. Click Start > Control Panel > System, then click the Hardware tab.
10. Click Device Manager, then click the “+” before Ports (COM & LPT). Look for
“Abaxis Blood Chemistry Analyzer.”
Note: If the analyzer does not appear in the device list, do not reinstall the
driver. Unplug the USB cable from the computer, then reinsert it. Check
the device manager again.
To Next Page
Loading...
