A-4 iQC Codes
4220 Drawer Open Jam Drawer cannot open correctly. Remove any
obstructions. If symptom persists, contact
Abaxis Technical Service.
4221 Drawer Closed Jam Drawer cannot close correctly. Remove any
obstructions. If symptom persists, contact
Abaxis Technical Service.
4222 CAM Up Jam Analyzer may need service. Contact Abaxis
Technical Service.
4223 CAM Down Jam Analyzer may need service. Contact Abaxis
Technical Service.
430B Spindle Motor Error Spindle motor not turning properly. Contact
Abaxis Technical Service.
iQC Code Probable Cause Solution
Note: If the iQC code is not listed or if you cannot correct a particular problem, record the iQC num-
ber or print the report, and contact Abaxis Technical Service, 24 hours a day, 7 days a week,
at 1-800-822-2947, or send a fax to 1-877-900-9333.
To Next Page
Loading...
