5-8 Configuring the Analyzer
c. Select the species. Use the up (S) and down (T)
arrow keys to scroll through the list.
d. Set minimum and maximum values for each of the
analytes to be included in the range.
i. Select the analyte to adjust. Use the up (S)
and down (T) arrow keys to scroll through the
list.
ii. Use the controls to set upper and lower limits
for the analyte.
❑ Use the up (S) and down (T) arrow
keys to adjust the values.
❑ Press Clear to set both limits to zero.
❑ Press Default to use the factory default
values for the range.
Note: Entering zero for both values suppresses printing
ranges for this analyte in results (blanks appear instead), and also sup-
presses checking the recovered value against the range limits.
e. Press Save to store the changes.
Species Available
HomeBack
Amazon
Budgerigar
Caiques
Canaries
Cockatiel
Amazon Ranges
HomeBack
ALB
0.0 - 0.0 g/dL
ALP
ALT
AMY
AST
0 - 0
0 - 0
0 - 0
0 - 0
U/L
U/L
U/L
U/L
ALB Amazon Range [g/dL]
SaveCancel
3.3 5.5
Lower
Upper
Clear Default
To Next Page
Loading...
