ABB ACQ580 - Page 276

272 Parameters
80.23 Pump outlet
diameter
Defines the pump outlet pipe diameter. 0.100
0.010...
32767.000 cm
Pump outlet pipe diameter. 1 = 1 cm
80.26 Calculation
minimum speed
Defines the speed limit below which flow is not calculated. 5.00
0.00...32767.00 Hz Minimum speed limit for flow calculation. 1 = 1 Hz
80.28 Density Defines the density of the fluid to be pumped for the flow
calculation function.
1000.00
0.00...
32767.00 kg/m
3
Fluid density. 1 = 1 kg/m
3
80.29 Total flow reset Resets the signal 80.02 To tal f low . Not selected
Not selected Total flow reset is not selected. 0
Reset Resets cumulative flow counter.
Note: The value reverts automatically to Not selected after
the flow is reset.
1
80.40 HQ curve H1 Defines the head at point 1 of the HQ performance curve.
See section Flow calculation (page 68).
0.00
0.00...32767.00 m Head at point 1 of the HQ curve. 1 = 1 m
80.41 HQ curve H2 Defines the head at point 2 of the HQ performance curve.
See parameter 80.40 HQ curve H1 (page 272).
0.00
80.42 HQ curve H3 Defines the head at point 3 of the HQ performance curve.
See parameter 80.40 HQ curve H1 (page 272).
0.00
80.43 HQ curve H4 Defines the head at point 4 of the HQ performance curve.
See parameter 80.40 HQ curve H1 (page 272).
0.00
80.44 HQ curve H5 Defines the head at point 5 of the HQ performance curve.
See parameter 80.40 HQ curve H1 (page 272).
0.00
80.50 PQ curve P1 Defines the power input of pump at point 1 on the PQ
performance curve.
See section Flow calculation (page 68).
0.00
0.00...32767.00 kW Power input of pump at point 1.
80.51 PQ curve P2 Defines the power input of pump at point 2 on the PQ
performance curve.
See parameter 80.50 PQ curve P1 (page 272).
0.00
80.52 PQ curve P3 Defines the power input of pump at point 3 on the PQ
performance curve.
See parameter 80.50 PQ curve P1 (page 272).
0.00
80.53 PQ curve P4 Defines the power input of pump at point 4 on the PQ
performance curve.
See parameter 80.50
PQ curve P1 (page 272).
0.00
80.54 PQ curve P5 Defines the power input of pump at point 5 on the PQ
performance curve.
See parameter 80.50 PQ curve P1 (page 272).
0.00
80.60 Q value Q1 Defines the flow rate at point 1 on the PQ performance curve.
See section Flow calculation (page 68).
0.00
0.00...
200000.00 m
3
/h
Flow rate at point 1 of the PQ curve. 1 = 1
No. Name/Value Description Def/FbEq16