ABB ACS580 - Page 299

Parameters 295
45.06 Saved money Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(45.14 Tariff selection).
When this parameter rolls over, parameter 45.05 Saved
money x1000 is incremented.
Specify the currency as text in Main menu - Primary
settings - Clock, region display - Units - Currency.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.00…999.99 units Monetary savings. 1 = 1 unit
45.07 Saved amount Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(45.14 Tariff selection).
Specify the currency as text in Main menu - Primary
settings - Clock, region display - Units - Currency.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.00…
21474830.08 units
Monetary savings. 1 = 1 unit
45.08 CO2 reduction in
kilotons
Reduction in CO
2
emissions in metric kilotons compared to
direct-on-line motor connection. This value is incremented
when parameter 45.09 CO2 reduction in tons rolls over.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0…65535 metric
kilotons
Reduction in CO
2
emissions in metric kilotons. 1 = 1 metric
kiloton
45.09 CO2 reduction in
tons
Reduction in CO
2
emissions in metric tons compared to
direct-on-line motor connection. This value is calculated by
multiplying the saved energy in MWh by the value of
parameter 45.18 CO2 conversion factor (by default, 0.5
metric tons/MWh).
When this parameter rolls over, parameter 45.08 CO2
reduction in kilotons is incremented.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.0…999.9 metric
tons
Reduction in CO
2
emissions in metric tons. 1 = 1 metric
ton
45.10 Total saved CO2 Reduction in CO
2
emissions in metric tons compared to
direct-on-line motor connection. This value is calculated by
multiplying the saved energy in MWh by the value of
parameter 45.18 CO2 conversion factor (by default, 0.5
metric tons/MWh).
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.0…214748300.8
metric tons
Reduction in CO
2
emissions in metric tons. 1 = 1 metric
ton
No. Name/Value Description Def/FbEq16
ACS580 FW.book Page 295 Wednesday, September 21, 2016 9:48 PM