Parameters 171
06.20 Constant speed
status word
Constant speed/frequency status word. Indicates which
constant speed or frequency is active (if any). See also
parameter 06.19 Speed control status word, bit 7, and section
Constant speeds/frequencies (page 80).
This parameter is read-only.
-
0000h…FFFFh Constant speed/frequency status word. 1 = 1
06.21 Drive status word 3 Drive status word 3.
This parameter is read-only.
-
0000h…FFFFh Drive status word 3. 1 = 1
No. Name/Value Description Def/FbEq16
Bit Name Description
0 Constant speed 1 1 = Constant speed or frequency 1 selected
1 Constant speed 2 1 = Constant speed or frequency 2 selected
2 Constant speed 3 1 = Constant speed or frequency 3 selected
3 Constant speed 4 1 = Constant speed or frequency 4 selected
4 Constant speed 5 1 = Constant speed or frequency 5 selected
5 Constant speed 6 1 = Constant speed or frequency 6 selected
6 Constant speed 7 1 = Constant speed or frequency 7 selected
7…15 Reserved
Bit Name Description
0 DC hold active 1 = DC hold is active (see par. 21.08)
1 Post-magnetizing
active
1 = Post-magnetizing is active (see par. 21.08)
2 Motor pre-heating
active
1 = Motor pre-heating is active (see par. 21.14)
3 Smooth start active Reserved.
4 Rotor position known 1 = Rotor position has been determined (autophasing not
needed). See section Autophasing (page 96).
5…15 Reserved
To Next Page
Loading...
