EasyManua.ls Logo

ABB ACS880-104

ABB ACS880-104
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
462 Parameters
FSE-31 FSE-31. 5
91.12 Module 1 location Specifies the slot (1…3) on the control unit of the drive into
which the interface module is installed. Alternatively, specifies
the node ID of the slot on an FEA-03 extension adapter.
Slot 2
Slot 1 Slot 1. 1
Slot 2 Slot 2. 2
Slot 3 Slot 3. 3
4…254 Node ID of the slot on the FEA-03 extension adapter. 1 = 1
91.13 Module 2 type Defines the type of the module used as interface module 2. None
None None (communication disabled). 0
FEN-01 FEN-01. 1
FEN-11 FEN-11. 2
FEN-21 FEN-21. 3
FEN-31 FEN-31. 4
FSE-31 FSE-31. 5
91.14 Module 2 location Specifies the slot (1…3) on the control unit of the drive into
which the interface module is installed. Alternatively, specifies
the node ID of the slot on an FEA-03 extension adapter.
Slot 3
Slot 1 Slot 1. 1
Slot 2 Slot 2. 2
Slot 3 Slot 3. 3
4…254 Node ID of the slot on the FEA-03 extension adapter. 1 = 1
91.21 Module 1 temp
sensor type
Specifies the type of temperature sensor connected to
interface module 1. Note that the module must also be
activated by parameters 91.1191.12.
None
None None. 0
PTC PTC. (The unit is ohms.) 1
KTY-84 KTY84. (The unit is selected by parameter 96.16 Unit
selection.)
2
91.22 Module 1 temp filter
time
Defines a filtering time for the temperature measurement
through interface module 1.
1500 ms
0…10000 ms Filtering time for temperature measurement. -
91.24 Module 2 temp
sensor type
Specifies the type of temperature sensor connected to
interface module 2. Note that the module must also be
activated by parameters 91.1391.14.
None
None None. 0
PTC PTC. (The unit is ohms.) 1
KTY-84 KTY84. (The unit is selected by parameter 96.16 Unit
selection.)
2
91.25 Module 2 temp filter
time
Defines a filtering time for the temperature measurement
through interface 2.
1500 ms
0…10000 ms Filtering time for temperature measurement. -
91.31 Module 1 TTL
output source
Selects the encoder input on interface module 1 whose signal
is echoed by or emulated to the TTL output.
See also section Encoder support (page 86).
Not selected
Not selected TTL output not in use. 0
No. Name/Value Description Def/FbEq16

Table of Contents

Other manuals for ABB ACS880-104

Related product manuals