Refit the module in reverse order.
￭ Replacing R5i inverter module (without option +C204)
See Replacing the R5i module main cooling fan (without option +C204) (page 103)
￭ Replacing R5i inverter module (with option +C204, modules in their
own compartments)
WARNING!
Read the safety instructions given in Safety instructions for ACS880
multidrive cabinets and modules (3AUA0000102301 [English]). If you
ignore them, injury or death, or damage to the equipment can occur.
1.
Stop the drive and do the steps in section Electrical safety precautions (page 57) before
you start the work.
2. Switch off the DC switch-disconnector of the compartment and open the door. You can
remove the door entirely for easier access.
3. Remove the fuses from the DC switch-disconnector of the compartment.
Maintenance 115
To Next Page
Loading...
