Note: The charging switch must be opened before the inverter unit can be started.
Type designation labels
￭ Inverter unit type designation label
Each inverter unit has a type designation label attached onto the inside of the cubicle door.
(Note that multiple small inverter units can be installed within one cubicle, and that an inverter
unit may consist of several cubicles and inverter modules.)
The type designation stated on the label contains information on the specifications and
configuration of the unit. The first digits express the basic construction of the unit, for example
“ACS880-107-0100A-3”. The optional selections are given thereafter, separated by plus
signs, for example “+E205”.
Quote the complete type designation and serial number when contacting technical support
on the subject of an inverter unit.
￭ Inverter module type designation label
Each module has a type designation label attached to it. The type designation stated on
the label contains information on the specifications and configuration of the module. The
first digits express the basic construction, for example “ACS880-104-0100A-3”. Any optional
selections are given thereafter, separated by plus signs.
Examples of the label are shown below.
34 Hardware description
To Next Page
Loading...
