DescriptionCode
FEN-21 resolver interface moduleL516
FEN-01 TTL incremental encoder interface moduleL517
FEN-11 TTL absolute encoder interface moduleL518
FSE-31 pulse encoder interface moduleL521
FAIO-01 analog I/O extension moduleL525
FDIO-01 digital I/O extension moduleL526
FPTC-01 thermistor protection moduleL536
FPTC-02 ATEX-certified thermistor protection moduleL537
Isolation relay for motor temperature switchL539
Starter for auxiliary motor fan
Trip limit setting range: 1 … 1.6 AM600
Trip limit setting range: 1.6 … 2.5 AM601
Trip limit setting range: 2.5 … 4 AM602
Trip limit setting range: 4 … 6.3 AM603
Trip limit setting range: 6.3 … 10 AM604
Trip limit setting range: 10…16 AM605
Trip limit setting range: 16…20 AM606
Trip limit setting range: 20…25 AM610
Starter for electromagnetic motor brake: 24 V DC, 0.40 … 0.63 AM660
Starter for electromagnetic motor brake: 115 V AC, 0.40 … 0.63 AM661
Starter for electromagnetic motor brake: 230 V AC, 0.40 … 0.63 AM662
Starter for electromagnetic motor brake: 400 V AC, 3-phase, 0.40 … 0.63 AM663
Control program
Winder control programN5000
Crane control programN5050
Winch control programN5100
PCP (Progressive Cavity Pump) control programN5200
Test bench control programN5300
ESP (Electrical Submersible Pump) control programN5600
Position control programN5700
Control program for synchronous reluctance motors (SynRM)N7502
IEC 61131-3 application programmabilityN8010
High speed (> 598 Hz) licenseN8200
Specialties
Special RAL Classic colorP913
Safety data calculation and validation for tailored safety functionsP947
Special color (other than RAL Classic)P966
Safety functions
Prevention of unexpected start-up with FSO-xx safety functions module, by activating the Safe
torque off function
Q950
Emergency stop (category 0) with safety relays, by opening the main breaker/contactorQ951
Emergency stop (category 1) with safety relays, by opening the main breaker/contactorQ952
Hardware description 39
To Next Page
Loading...
