3.6.2 Inspection of oil levels
Location of oil plugs, axes 2 and 3
The oil plug, filling for the gearbox unit, axes 2 and 3, is located as shown in the
figure below. The figure shows the location of the axis-2-side and is the same on
the opposite side.
xx0300000331
Oil plug, fillingA
Location of oil plugs, axis 4
The axis 4 gearbox has one oil plug for draining and one oil plug for filling, located
as shown in the figure below.
xx0300000220
Upper oil plug, fillingA
Lower oil plug, drainingB
Continues on next page
Product manual - IRB 4400 115
3HAC022032-001 Revision: Q
© Copyright 2004-2018 ABB. All rights reserved.
3 Maintenance
3.6.2 Inspection of oil levels
To Next Page
Loading...
