EasyManua.ls Logo

ABB PRO-33.0-TL Series - Input Protection

ABB PRO-33.0-TL Series
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
124 Technical data
Input protection
Inverter type PRO-33.0-TL-OUTD-[-/S/SX]-400
Reverse polarity protection Inverter protection only, from limited current source, via
short-circuit diode and for fused -SX model when more
than 2 strings are connected.
Input overvoltage protection (Std & -S) 3 varistors
Input overvoltage protection (-SX) 3 plug-in modular surge arresters, Type II
Plug-in modular surge arrester type Phoenix Contact VAL-MS-1000DC-PV/2+V-FM
or
ABB OVR PV 40 1000 P TS BW
Replaceable surge arrester modules Phoenix Contact VAL-MS-1000DC-PV-ST 2800624
or
ABB OVR PV 40-1000 C 2CTB803950R0100
Photovoltaic array isolation control According to local standard
Insulation monitoring Impedance measurement between DC terminals and
ground
DC switch rating and type (-S & -SX) 58 A / 1000 V, 50 A / 1200 V, Benedict LS32 V 7774
PV string fault current protection (-SX) Solar string fuse, 10x85 mm, 1,100 V
DC
, all input
terminals monitored
PV string fuse rating (-SX) 15 A / 1,100 V
Tested and approved solar string fuse
types (-SX)
ETI CH10x85 gPV, 12 A / 1,500 VDC, Art.:002625205
ETI CH10x85 gPV, 15 A / 1,500 VDC, Art.:002625240
Mersen DC10-1200VDC, 12.5 A / 1,200 VDC,
DC10HEL12C12.5
Mersen DC10-1200VDC, 16 A / 1,200 VDC,
DC10HEL12C16
Littelfuse SPXV012.T, 12 A / 1,500 VDC
Littelfuse SPXV015.T, 15 A / 1,500 VDC
PV string fuse maximum rating (-SX) 20 A
String current measurements (-SX) Individual string current monitored, configurable alarm
limit
Overvoltage category OVC II

Table of Contents

Related product manuals