92 Operation
Graphical display
The graphical display shows:
• Operational status
• Menus
• Performance monitoring
• Event messages (for example, faults, warnings and maintenance reminders)
• Help texts
Refer to Start-up on page 75 for information on settings necessary when the inverter
is started for the first time.
Refer to Navigation map on page 133 for a map of the inverter menu hierarchy.
Display layout
The graphical display has the general layout shown in the example view. Some
special screens have a different layout.
Energy view
The Energy view shows the status and history of the power produced by the system.
This view is shown when the inverter starts and detects user interaction.
The user can toggle back and forth between numeric and graphical histogram views.
The histograms show one column per hour, day, month or year. The current column is
always shown in a different shade to the others. Use the left and right arrow keys to
choose between different time periods. Note that if you change the date and time
settings, this has an effect on the energy views.
In the Energy: Today view, the number in the upper right corner shows the cumulative
value of energy produced during the day so far. The number in the upper left shows
the current output power in kW. If the inverter is disconnected from the grid or is not
feeding power, then “-- kW” is shown.
The format (12-hour or 24-hour) of the time points below the graph depends on the
country settings. You can set the format in the Date and time submenu.
Example view No. Area Description
1 Status bar Current view, date and status icon.
Not shown in special screens.
2 Content area Current view contents, e.g. menu,
parameter, help text, etc.
3 Softkey bar Softkey commands and the real-
time clock, if enabled. The
commands depend on the view.
To Next Page
Loading...
