Operation 93
In the Energy: This week, Energy: This month, Energy: This year, and Energy: 24
years views, the number in the upper right corner shows the cumulative value of
energy produced during the week, month, year and 24 years respectively.
The Total view shows cumulative values since the unit was installed. The Energy
output and Operation time are always shown. The CO
2
reduction header and value
are shown only if a reduction standard has been set with Menu
-
>
CO2 reduction.
The Technical info 1 and Technical info 2 views show the actual DC input, actual AC
output voltage and actual AC power values.
The Sun view shows the current state of the unit and the output power in graphical
format. Refer to Operating modes on page 89 for examples. Use the up arrow to
access the Sun view.
When the unit is in the power feeding mode, a full sun and ten rays are shown. The
rays fill to indicate the current output power. For example, if half of the rays are filled,
the unit operates at 50% output power.
Menu
You can use the Menu to change parameters and access event logs.
Date & time submenu
Use this submenu to set the date and time, and
their display formats. Refer to First start up on
page 74.
Language submenu
The Language menu shows the available and
selectable control unit languages. Refer to First
start up on page 76.
To Next Page
Loading...
