46 Mechanical installation
Move the unit
WARNING! Use a hoist when you lift the heavy unit. The unit weighs
approximately 67 kg (148 lbs) and is top heavy.
Move the unit to the installation area.
To install the wall-mounting plate, refer to Install the wall-mounting plate on page 44.
You can lift the inverter with a crane or by hand.
To use a crane
1. Install the 2 eye bolts to the top of the inverter.
2. Attach the lifting hooks to both eye bolts.
3. Lift the inverter carefully and steady it manually.
To move the inverter by hand
• At least two persons are required (follow local
occupational safety regulations).
• Lift the inverter upright carefully.
• Use the handholds on the bottom of the inverter.
To Next Page
Loading...
