Using the send and return
External effects can be used by connecting them to the send and return jacks.
The send/return positions can be set as desired and saved in each patch memory.
NOTE
The send/return is counted as one of the maximum number of the effects in the patch memory.
(→ Note about the number of effects in patch memories)
1. Connect an external effect to the B6.
❶
Connect it to the output jack.
❷
Connect it to the input jack.
2. Select the patch memory in which you want to set a send/return.
3. Touch on the Menu Screen.
4. Drag to the position where you want to set the send/return. Then, touch .
104
To Next Page
Loading...
Need help?
General