Terms used in this manual
Patch memory
Patch memories store effects and amps used, effect on/off states and parameter setting values, allowing
easy recall. Effects are saved and recalled in units of patch memories. Up to 9 effects can be added to a
patch memory, and up to 240 patch memories can be stored.
Bank
One group of 4 patch memories is a “bank”. Patch memories can be quickly recalled by switching banks. Up
to 60 banks can be stored.
Effect type
The available effect types include various bass effects and amp/cabinet simulation models. Effects can be
selected from these types to be added to patch memories.
Category
Effects are grouped by types into categories.
Autosave
This function automatically saves changes to patch memory and effect settings.
ECO mode
This function will automatically turn the power off 10 hours after the last operation.
Looper
Stereo phrases that are up to 45 seconds long can be recorded and played back repeatedly.
By using an SD card, the recording time can be lengthened and phrases can be saved. An SD card also
enables use of other audio files as loops.
Preselect
This function allows continued use of the current patch memory sound while switching to another patch
memory at a distant number.
3
To Next Page
Loading...
Need help?
General