Creating patch memories
New patch memories can be created.
1. Touch on the Menu Screen.
This opens a screen for creating patch memories.
❶
Select effects
❷
Select a preamp
The CREATE PATCH MEMORY Screen starts with two effect categories and a preamp ready for
selection.
Create a patch memory by selecting desired effects and a preamp.
• DYNMCS: Use this to select compressors and other dynamics effects.
• FILTER/DRIVE: Use this to select equalizers and other filter effects, as well as to select overdrive and
other distortion effects.
• PREAMP: Use this to select a preamp.
NOTE
Up to 240 patch memories can be saved. The CREATE PATCH MEMORY Screen will not be shown if there are
no empty patch memories. Delete unnecessary patch memories to enable use.
81
To Next Page
Loading...