2. Swipe up or down on the touchscreen to select patch memories.
Select the next patch memory.
Select the previous patch memory.
The footswitches can also be used to select banks and patch memories.
❶
Select the previous/next bank.
❷
Select the previous/next patch memory.
HINT
• Touch the patch memory name to open a screen where the patch memory can be edited, allowing effects
to be added, changed, deleted and adjusted, for example. (→Making all settings on one screen)
• The PRESELECT function can be used in BANK/PATCH mode. This allows the next patch memory to be
selected in advance and then switched to with one press. This is useful for switching to patch memories
that are not near the current one when performing live. (→Using the PRESELECT function)
37
To Next Page
Loading...