5. Repeat steps 2–4 to select other effects and preamps.
If the AUTOSAVE function (→ Setting the AUTOSAVE function) is on, created patch memories will be
saved automatically.
If the AUTOSAVE function is off, touch to open the screen for saving patch memories and follow
the instructions inSaving patch memories
6. Edit the patch memory as necessary.
Effects can be added, deleted and replaced. The patch memory name can also be changed and the
patch level adjusted, for example.
❶
Add effects
Various effects can be added, including choruses, flangers and other modulation effects, delays,
reverbs and other spatial effects, as well as pedal effects. (→ Adding effects)
❷
Delete effects
(→ Deleting effects)
❸
Replace effects
(→Replacing effects )
❹
Change patch memory names and levels
(→ Changing patch memory names, Setting the patch memory level)
❺
Adjust effects
Touch the icon for an added effect or preamp to enable adjusting it. (→Adjusting effects)
83
To Next Page
Loading...