ACUTRONIC fabian +nCPAP evolution - Resistance Values; Ventilation Menu Settings

19 Technical specifications 123
fabian +nCPAP evolution | SW V5.1.x
Ref: 122003.EN / Date : 26Jan2021
Overdistension Index C20 / C Range:
Resolution:
0 to 5
0.1
19.4 Resistance values
System Resistance at 30 L/min
<20 mbar / Lps
Inspiratory Resistance
<12 mbar / Lps
Expiratory Resistance
<8 mbar / Lps
19.5 Ventilation menu settings
Alarm delay
• 0 to 30 seconds
Automatic O
2
calibration
• 21% Vol.
• 21% Vol. and 100% Vol.
E–flow
• 1 to 32 L/min
Max. time Manual breath
• 2 to 30 seconds
Flush time
• OFF
• 30 sec
• 60 sec
• 120 sec
NIV Leak compensation
• Off / Low / Middle / High
NIV Tube set
• MediJet
• Infant Flow (Infant Flow or Inspire)
• Infant Flow LP
Ppsv parameter
• Set as absolute value
• Set as above PEEP parameter
Ratio of I-time
• Set as Frequency / I–time
• Set as I–time / E-time
Pressure Rise
• I-flow
• RiseTime
Termination criteria PSV
• 1 to 85%
Trigger (Conventional)
• Volume trigger
• Flow trigger
• Pressure trigger
Transport mode
• enabled / disabled
Unit for Pressure
• mbar
• cmH
2
O
Use BTB for Vt
• Enabled
• Disabled
Vlimit / Vguarant
• Vlimit
• Vguarant