ACUTRONIC fabian +nCPAP evolution - 9 Operating on External Power Source; Devices with SN up to AN-03999)

72 9 Operating on external power source
fabian +nCPAP evolution | SW V5.1.x
Ref: 122003.EN / Date : 26Jan2021
9 Operating on external power source
9.1 (Devices with SN up to AN-03999)
The device can also be operated from an external power source.
In this case connect the external 12 to 24 Volt power source at the back of the equipment.
External power connection on the back
panel.
1/2 minus
3/4 plus
• NO charging when connected to 12VDC external power supply
• NO monitoring of remaining time on external power supply