ACUTRONIC fabian +nCPAP evolution User Manual

5 System operation 35
fabian +nCPAP evolution | SW V5.1.x
Ref: 122003.EN / Date : 26Jan2021
5.2.3 Connect nCPAP tubing
Preparing the nCPAP tubing system:
Connect nCPAP adapter to the
fabian nCPAP port (1). (REF:
153001).
Connect the 22 mm adapter
connector to the Humidifier
Chamber inlet.
Connect the nCPAP system
Pressure measuring limb to the
fabian port marked Prox (2).
Connect the nCPAP system to the
Humidifier Chamber outlet.
Apply the nCPAP system to the
Patient according to its
manufacturer instructions.
For details of using nCPAP systems, refer to the manufacturer operator’s manual for
consumables.
5.2.4 Triggering in DUOPAP mode with flow sensor
(optional)
Preparing the nCPAP
InfantFlow/InfantFlowLP/Inspire Tubing
System
• Connect Flow sensor to
exhalation tube as shown in the
picture.
Recommendation:
• Make the Exhalation tube as
short as possible.
1
2

ACUTRONIC fabian +nCPAP evolution Specifications

General

Brand	ACUTRONIC
Model	fabian +nCPAP evolution
Category	Medical Equipment
Language	English