4 System functions and displays 17
fabian +nCPAP evolution | SW V5.1.x
Ref: 122003.EN / Date : 26Jan2021
4.2.3 Information bar
The Information bar displays general information and/or alarms. It is divided
into 3 sections.
The Information bar indicates the
following among other things:
• Neonatal or Pediatric
• Transport mode
• Patient data available
• Nurse call active / inactive
• Battery charge status
Ventilation mode, information and
alarm message display
Alarm Silence (time remaining until
alarm reactivates). Time / Date
Pediatric mode. For patients above 10
kilograms bodyweight, use of Pediatric
mode is recommended. Extended range for
flow and volume is available.
Neonatal mode. Used for patients up to 10
kilograms bodyweight.
The Ambulance symbol indicates that the
Transport mode is activated, This is limiting
Pressure to 60 mbar
The Patient symbol indicates patient data
associated with the current ventilator
operation is saved to the device.
The Nurse indicates Nurse Call is activated
Ventilation mode / Info / and Alarm display
Displays ventilation mode and, if
applicable, additional current information
and notices. A RED blinking Information bar
also alerts the operator of active alarms.
If screen lock is in use, the symbol for
Locked Screen is displayed.
To Next Page
Loading...
General
