１１９
22.17 Jogging 1 ref
Range: 0.00 ~ 400Hz in 0.01 Hz
Initial value: 0.00 Hz
Jogging frequency is used to move/rotate the motor in small increment at low frequency.
It is selected using input terminal.
22.12
ON
22.17
22.11
22.10
22.17
F
ON ON ON ON
ON
ON
ON
Run command
22.17 22.17
22.07 (Constant frequency source 1)
22.08 (Constant frequency source 2)
20.11 (Jogging 1 start source)
22.10 (Constant frequency 1)
22.11 (Constant frequency 2)
22.12 (Constant frequency 3)
22.17 (Jogging 1 ref)
22.18 Jogging 2 ref
See the parameter '20.17' (Jogging 1 ref)
Initial value: 0.00 Hz
To Next Page
Loading...