Adtech iMASTER – A1 Series - Frequency Command Source to Input Terminal - Up;Down

A1-User’s Manual
５３
7.4 Frequency Command Source to Input Terminal – Up/Down
 Input Terminal Diagram
 Programming A1 Parameters
 Diagram
UP
reset
Output frequency
UP/DOWN ref
Run command
ON
ON ON
ON
ON
ON
ON
ON
 Programming A1 Parameters
 On Keypad, program following parameters with corresponding values:
Code
Set
Value
Description
22.25
~
22.34
-
UP/DOWN Enable, Initial value, Up/Down Source, Reset Source,
etc.