Adtech iMASTER – A1 Series - Page 15

A1-User’s Manual
１１
!
CAUTION
 Avoid direct ray of light or a warm and humid place.
 Install the VFD in a place free from dust, corrosive gas, explosive gas, combustible gas,
mist of coolant and sea damage.
 Allowable Temperature range (14 to 122°F, -10 to 50℃).
 Allowable humidity range (Below 90% RH).
Mount the VFD in a vertical position using screws or bolts. The mounting surface should also be
free from vibration and can easily hold the weight of the VFD.
Unacceptable (X)Acceptable (O) Acceptable (O) Unacceptable (X)