Need help?Do you have a question about the AEM TESTPRO CV100 and is the answer not in the manual?
General| Brand | AEM |
|---|---|
| Model | TESTPRO CV100 |
| Category | Network Hardware |
| Language | English |
Explains the function and operation of the power button for the TestPro CV100.
Describes how to use the Home button to return to the touchscreen's main interface.
Details how the Test button initiates an autotest based on the connected adapter.
Describes the capacitive/resistive touchscreen and graphical user interface.
Explains the meaning of the Status LED colors for battery charging and power status.
Details the USB connection for PC linkage and test result transfer.
Describes the USB port for flash drive connection and software updates.
Specifies the RJ45 port for validation testing of cables up to 1 Gbps.
Explains the DC power input connection and safety warning for power supply.
Describes the use of plug-and-play adapters to change the device's function.
Explains how to use the retractable stand for hands-free operation.
Instructions on how to set the device's date and time, including timezone synchronization.
Details on setting the sleep mode timer to conserve battery power.
Explains how to configure the automatic power-off timer for the device.
How to adjust display brightness and audio volume levels.
Guide on choosing the device's display language from a list.
How to change the graph direction (Up or Down) for copper certification results.
How to select between Metric (Meter) and US (Feet) measurement units.
Setting options for automatically saving test results based on pass/fail criteria.
Enabling the feature to automatically start autotest upon cable connection.
Configuration for testing cables between 500 and 1000 meters.
Information on device licensing requirements for certification features.
Shows device model, serial number, software, and hardware versions.
Setting the device as either the Main or Remote unit for testing.
Displays the total, used, and free storage space on the TestPro device.
Shows the current battery status, charging level, and estimated time remaining.
Steps to recalibrate the battery gauge for accurate readings.
Process to reset the device to its original factory settings.
Note that the factory menu is intended for internal manufacturer use only.
Procedure to export saved test results from the device to a USB flash drive.
How to import custom labels from a USB drive into the TestPro device.
Guide on creating custom labels in CSV format for importing into TestPro.
Instructions on copying license files to the TestPro device via USB.
Steps to update the device firmware using a USB flash drive.
How to export project files from the TestPro to a USB flash drive.
Procedure for importing project data from a USB flash drive into the TestPro.
Covers creating, switching, cloning, and deleting projects/profiles for organizing tests.
Explains how to detect cable faults in real-time using the LiveWiremap feature.
Importance and steps for performing set reference for accurate measurement.
Guide on choosing and customizing test limits for copper cable certification.
How to import custom test limits into the device using TestDataPro software.
Importance of documenting and selecting correct cables and connectors for testing.
Instructions on adding new cable part numbers to the TestPro database.
How to create and use label schemes to identify test results.
How to add and manage operator names for test reports.
Step-by-step guide on how to perform a comprehensive cable autotest.
Instructions on how to save the results obtained from an autotest.
How to measure DC resistance and resistance unbalance of a cable.
Performing a single-ended autotest, primarily for laboratory use.
How to use the tone generator to locate specific cables in a bundle.
How to determine the Nominal Velocity of Propagation (NVP) value for a cable.
How to measure the length of a cable using the NVP value.
Testing the integrity of shielded cables and locating shield issues.
How to switch the AD-NET-CABLE adapter between Validation and Certification modes.
Verifying multimode fiber launch conditions using HOML test.
Performing set reference using one, two, or three jumper methods for accuracy.
Procedure for performing a dual-ended set reference for fiber testing.
Procedure for performing a loopback set reference for fiber testing.
Steps to correctly set up fiber optic tests for accurate results.
Guide on selecting and customizing fiber test limits based on standards.
Setting fiber test configurations like loopback or dual-ended modes.
How to select and add fiber cable types to the TestPro database.
How to select and add fiber connector types to the TestPro database.
Step-by-step guide on how to perform an automated fiber certification test.
How to save the results obtained from a fiber optic autotest.
Using the VFL to detect fiber cable issues such as breaks and bends.
Using the light source and power meter for fiber optic testing.
Using the inspection tool to check fiber connectors for dirt and damage.
Measuring DC resistance in powered fiber cable systems.
Performing set reference specifically for Fiber PoE DC resistance tests.
How to create and manage projects and profiles for Multi-Gig, PoE, and BASE-T tests.
How to adjust test limits for Multi-Gig, PoE, and BASE-T Ethernet tests.
Choosing appropriate cable and connector types for these specific tests.
Options for validating Multi-Gigabit links and PoE performance.
Procedure for performing BASE-T Ethernet validation tests.
Testing PoE devices such as switches, routers, and midspans.
Performing load tests on PoE devices to qualify link speeds under load.
How to save the autotest data obtained from Multi-Gig, PoE, and BASE-T tests.
Performing set reference for Single Pair Ethernet tests using adapters.
Selecting and customizing test limits for Single Pair Ethernet certification.
Choosing the correct SPE cable and connector for proper testing and reporting.
Step-by-step guide on how to perform an automated Single Pair Ethernet test.
How to save the autotest results obtained from SPE testing.
Performing set reference using a 2-meter coaxial cable for coax tests.
Selecting appropriate limits for 50 or 75 Ohms coaxial cable testing.
Selecting the correct coax cable and connector from the database.
Step-by-step guide on how to perform an automated coaxial cable test.
How to save the autotest results obtained from coax testing.
Performing set reference for crossover cable wiring configurations.
Selecting the appropriate test limit for crossover cable tests.
Choosing the correct wiring option (e.g., Crossover) for testing.
Step-by-step guide on how to perform an automated crossover cable test.
How to save the autotest results obtained from crossover testing.
Performing network discovery and basic tests to identify network issues.
Using the Ping utility to test network connectivity and measure latency.
Analyzing network paths and measuring packet transit delays.
Generating UDP packets and monitoring received packets on the network.
Discovering and analyzing VLAN information within a network.
Identifying switch name, model, and port details on the network.
Testing TCP connectivity to selected network targets and verifying port availability.
Connecting to and testing Wi-Fi networks using an optional adapter.
Managing saved Wi-Fi access points, including adding and clearing entries.
Checking Wi-Fi signal strength and identifying weak spots or blind spots.
Performing automated network tests including limit selection and autotest execution.
Uploading test results to the TestDataPro cloud service via network connection.
Copying test results from the TestPro device to a USB flash drive.
Using TestDataPro software to manage, analyze, and report test results.
Creating test reports in PDF format from the test results.
Exporting multiple test reports into single or split PDF files.
Adding hierarchical locations like building, floor, rack, or panel to projects.
Converting measurement values from meters to feet.
Steps to update the TestPro firmware using a USB flash drive.
How to update the firmware using the TestDataPro software.
To Next Page