41
WWW.AEM
-
TEST.COM
customercare@aem-test.com | Version # : 2.2
TestPro CV100
User Manual
•
•
Select[Tools].
Select[NetworkTests].
Note: To use the network test feature refer to 8a.
Network Test.
TestPro’s Database Manger for Wi-Fi allows users to add,
remove and clear saved access points,. Whenever TestPro
connects to an access points it automatically saves the
SSID and password to the DB Manager. To access DB
Manager:
ii. DB Manager
•
•
•
•
•
•
•
Select[Tools].
Select[DBManager].
The DB Manger screen will show a list of access points.
Toaddanaccesspoints,select[Add].
Inthe [access pointsName] eld,keyin the nameof
the access point you are trying to connect to. In the
[Security]eld,chooseeither[Open]or[WPA-PSK].In
the[Password]eld,keyinthepasswordofthataccess
points.
To connect to the new access points, select [Verify
Network].Tosavetheaccesspointsselect[Save].
To delete an access points, choose the SSID name &
select [Remove]. [Clear] will delete all saved access
pointsintheDBManager.Select[Clear].
A dialog box requesting conrmation to delete will
appear. Select as required.
•
TestPro Signal Strength Indicator is a real time Wi-Fi
signal checker with a range of -90 dBm to 10 dBm, where
-90 dBm is the weakest & 10 dBm is the strongest wireless
signal. This is a great tool to check weak signals and blind
spotsafteraccesspointinstallation.IthasWI-FIhand-o
functionalitytoforcehand-osfromoneaccesspointto
another that shares the same SSID & password. To get
Signal Strength:
iii. Signal Strength
To Next Page
Loading...
Need help?
General