AEM TESTPRO CV100 - Restore Default Factory Settings; Factory Menu Access; Copy Test Results to USB; Import Label List from USB

11
WWW.AEM
-
TEST.COM
customercare@aem-test.com | Version # : 2.2
TestPro CV100
User Manual
q.RestoreDefaultFactorySettings
Select[Settings]onthehomescreen,then[Device]
Select[RestoreDefaultFactorySettings].
On the popup, select Yes to restore TestPro to default
factory settings. The device will restart.
•
•
•
r.FactoryMenu
Factory Menu is for manufacturer’s internal use only. Access
to this function is not available to users.
s. USB
WhenaUSBashdriveisinsertedtotheTestProUSBport,
deviceoersmultiplefunctionsi.e.CopyTestResultstoUSB,
Import Label List, Copy License , Upgrade Firmware, Export
Project and Import
Project. Refer to the steps required for each of these features
in the TestPro User Guide. To access the USB menu again, click
Settings > USB.
i:CopyTestResultstoUSB
Copy Test Result to USB will export all the test results saved
insideTestPrototheUSBashdriveunderTestDatafolder.
Select[CopyTestResultstoUSB]
Select from a list of projects to be exported to USB i.e.
TEST PROJECT and click Yes
TestPro will pop up a message on the number of test
results copied.
•
•
•
ii:ImportLabelList
The Import Label List feature provides an easy way to create
labels from a computer & copy these labels onto the device.
On the USB ash drive, create a folder “CustomLabel”
(Without the ““)and copy all the labels that areto be
imported.
•