EasyManuals Logo

AEM TESTPRO CV100 User Manual

AEM TESTPRO CV100
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
WWW.AEM
-
TEST.COM
customercare@aem-test.com | Version # : 2.2
TestPro CV100
User Manual
3FiberCerticationTest
FiberCerticationTestisusedtoevaluatetheperformanceof
beropticcomponentsagainstTIAandISOstandards.These
components include ber optic cable, adapters and splices.
TestPro supports Multi-mode and Single-mode Fiber.
In the eld, launch conditions for Multimode Fiber
AdapterscanbeveriedthoughtheHigherOrderMode
Loss(HOML)test.Thistest-amultimodeberadapter
encircleduxlaunchconditionvericationineld-can
bereadilycreatedintheeldtogaugeandadjustlaunch
conditions through the supplied reference-grade launch
cord.TheHOMLqualicationofthesourceandlaunch
cord combination involves the use of a launch cord with
and without applied mandrel wrap.
a.MultimodeLaunchVerication
Mandrel diameter prescriptions per TIA-526-14-C
Fiber nominal
core diameter
[μm]
50
62.5
900μm
buered ber
[mm (in)]
25 (0.98)
20 (0.79)
1.6mm jacketed
cordage
[mm (in)]
19 (0.75)
24 (0.94)
2.0mm jacketed
cordage
[mm (in)]
23 (0.91)
18 (0.71)
2.4mm jacketed
cordage
[mm (in)]
23 (0.91)
18 (0.71)
3.0mm jacketed
cordage
[mm (in)]
22 (0.87)
17 (0.67)
Note: The mandrel diameters are based on nominal values
of 20 mm (0.79in) and 25mm (0.98in) reduced by the
cordage diameter and rounded up. Mandrel prescriptions
apply to 850nm and 1300 nm sources.
InTestProprole,select[Limit].
Select[TIA].
Select[03MPTL].
Choose appropriate MPTL Limit. To test CAT6A MPTL
limit to test CAT6A link.
Start[Autotest].
Interpret the Pass/Fail result like normal Copper
Certication.
The TestPro CV100 supports
multi-mode and single mode
ber certication test as well as
loopback, dual ended & single
ended test congurations.
TestPro comes preloaded
with TIA, ISO, and loss budget
limits that users can customize
according to their needs.
MandrelWrapfor
Multi-Mode (if required)
Upto2meters
MandrelWrapfor
Multi-Mode (if required)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEM TESTPRO CV100 and is the answer not in the manual?

AEM TESTPRO CV100 Specifications

General IconGeneral
BrandAEM
ModelTESTPRO CV100
CategoryNetwork Hardware
LanguageEnglish