Need help?Do you have a question about the AEQ FORUM and is the answer not in the manual?
Provides a high-level introduction to the AEQ FORUM mixer's purpose and design.
Details the technical capabilities and features of the AEQ FORUM mixer.
Describes the physical arrangement and components of the mixer's control surface.
Outlines the various input, output, and interface connectors on the rear panel.
Manages system time, date, chronometer, and countdown functions.
Allows user login, logout, and management of system access levels.
Manages configuration snapshots for saving and loading settings.
Overview of the primary menu options for system configuration.
Manages user access levels and software-mixer communication settings.
Configures system input/output modules and logical audio channels.
Configures signal routing, programmable keys, mic groups, and presets.
Allows updating firmware versions for the AEQ FORUM.
General| Type | Digital Audio Mixing Console |
|---|---|
| EQ | 4-band parametric EQ on each channel |
| Dynamics | Compressor per channel, gate per channel, limiter per channel |
| Automation | Full automation |
| Phantom Power | +48V, switchable per microphone input |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Power Supply | 100-240V AC, 50/60Hz |
| Dimensions | Varies depending on frame size and configuration |
| Weight | Varies depending on frame size and configuration |
| Microphone Inputs | Via optional input modules |
| Line Inputs | Via optional input modules |
| Line Outputs | Via optional output modules |
| AES/EBU Inputs/Outputs | Via optional input/output modules |
| Analog Inputs/Outputs | Via optional input/output modules |
| Redundancy | Dual power supply option |
To Next Page
