AEQ FORUM
Digital audio mixer for broadcast applications
33
The four options visible on the last line of the display are associated with the four contextual
keys below, from left to right:
• “BACK”: returns to the previous menu screen.
• “SET”: enables you to access to the date and time configuration menu. When you
access to this menu, the time configuration is available (a flashing arrow is displayed
next to the current time) by means of using the 3 rotatory encoders (turning the first one
allows you to change the hour, the second one the minutes and the third one the
seconds).
When you press the “DATE” contextual key, you access to the date configuration
menu (the flashing arrow changes its position and the “DATE” changes to “TIME”): by
pressing the first encoder you can change between day of the week and day of the
month and by turning it allows you to change the selected option; you can configure the
month by turning the second encoder and the year by turning the third one.
Once date and time are configured, you can press the “SET” key in order to save the
changes and return to the previous screen or the “BACK” key in order to return to that
screen without changes saving.
• “CDOWN”: lets you configure and activate the AEQ FORUM Countdown option through
the associated rotary encoders. The format on screen is HOURS:MINUTES:SECONDS.
You can configure the hours by turning the first encoder, the minutes by turning the
second one and the seconds by turning the third one. The “START” contextual key
launches the countdown, the “STOP” key (the same key that changes its function)
brings it to a stop, and the “RESET” key re-establishes the initially configured value
(even when the countdown is launched). The “BACK” key allows you to return to the
previous screen (it also stops the countdown and re-establishes the initial value).
To Next Page
Loading...
Need help?
General